What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 07:12

These devices are installed between the “hot” and “neutral” and protective ground.
This is 'the assistant's answer'
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What do you think hell is like?
This device then solves the entire problem.
[image of Common-mode choke]
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
How do I run away? I'm 15 and live in Oklahoma.
One is “what exactly is in a ‘surge protector’ ? ”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Russia’s central bank cuts interest rates for first time since 2022 - Financial Times
the problem then depends on "how fast does the fuse operate?".
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
eight
2025 Stanley Cup Finals Preview: Can Connor McDavid Finally Do It? - The Ringer
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Upvotes:
but I think this circuit , shows a few more pieces.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This one hit behind the barn.
This is where this question deviates from being a 'generic' question, and becomes more specific.
How are you spending your best time?
[old diagram got deleted by accident]
He then describes Rainy Season and Lightning.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Now when you have a certain ac resistance, then a current flows in a loop.
First Sentence:
Here is a simplified AC power diagram.
Obituary for Alan A Hines - holcombefuneralhomes.com
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
But it can get overloaded, and no longer works.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Why are Trump supporters so incredibly stupid?
There are three different concepts here that are getting confused.
There are two important concepts here.
What is lightning?
Can being annoyed be a sign of getting angry?
The third is lightning and “how it gets conducted into a home.”
I post the exact comment here.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What are some sad truths about life?
(Dc diagram shown, AC is similar).
So, the voltage could go up to 500 volts, and the fuse will not open up.
nine
Why do I (45, male) feel like I'm crushing on a girl (19, female)?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
but this device (an Inductor) … impedes the rapid changes in the current.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
so, what happens?
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–16 [ OO OLAOYE OYEBODE ]
At least they know the answer if they wanted it.
These are simplified answers to the original question, and does not change anything I wrote above.
An AC voltage/ current source, and an ac inductive load.
He then asserts :
In schematic diagrams this is the symbol for a fuse:
The MOV will conduct when the voltage exceeds 50% of line voltage.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
a photo is worth a thousand words.
This is where the MOV conducts again, and dissipated the energy.
The bolt then partially travels down the line to your home.
Edit 2024–10.
Barnstars:
A fuse is a non-resetable over current circuit protector.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
what exactly is a ‘surge’ protector?
But… the neutral is now “floating” because of the 1 ohm resistance.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
He then describes the function of a fuse.
One
It also is a device that limits the change in current flow.
A circuit breaker is similar, but is resettable.
For this case there are devices called Metal oxide varistors (MOV).
It seems Mohan does not understand the difference between a comment and an Answer.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–14 [Omar Gharbi Omar Gharbi ]
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
The other is “what does a “fuse” do?”
Can the fuse protect the electronic devices from lightning instead of a surge protector.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
2024–10–10[John johnson John Johnson ]
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
What does a fuse do?
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.